FSC-BT1006A Qualcomm QCC3007 Bluetooth 5.0 Audio Module


The Feasycom FSC-BT1006A is a dual-mode Bluetooth 5.0 audio module based on the Qualcomm QCC3007 Bluetooth chip. It provides a Bluetooth Low Energy fully compliant system for audio and data communication with Feasycom stack. FSC-BT1006A integrates an ultra-low-power DSP and application processor with embedded flash memory, a high-performance stereo codec, a power management subsystem, I2S, LED drivers and ADC 1/0 in a SoC IC. The dual-core architecture with flash memory enables manufacturers to easily differentiate their products with new features without extending development cycles. By default, FSC-BT1006A module is equipped with powerful and easy-to-use Feasycom firmware. It's easy-to-use and completely encapsulated. Feasycom firmware enables users to access Bluetooth functionality with simple ASCIl commands delivered to the module over serial interface, just like a Bluetooth modem. Therefore, FSC-BT1006A provides an ideal solution for developers who want to integrate Bluetooth wireless technology into their design.


  • Bluetooth v5.0/4.0/3.0/2.1/2.0/1.2/1.1, Class 1.5
  • 80 MIPS performance, 24-bit fixed-point DSP core
  • Over the air updates of external Flash partitions
  • Wideband speech support
  • Stereo codec
  • Stereo line input
  • SBC and AAC audio codecs support
  • 1-mic cVc hands-free NR/EC
  • Supports MFi
  • Audio interfaces: dual I2S and PCM, SPDIF, analog and digital microphone
  • Fully configurable EQ: 6 banks for music enhancement; 1 bank for speaker
  • Supports HSP, HFP, A2DP, AVRCP, PBAP, MAP, SPP, and BLE profiles
  • 3 Hardware LED controllers (for RGB)
  • UART, I2C, SPI, PIO, AIO, and USB 2.0 control interfaces
  • Supports full-duplex Acoustic Echo Cancellation
  • Postage stamp sized form factor
  • Built-in RF combo filter, built-in PCB antenna to support external antenna
  • Fast charging support up to 200 mA with no external components
  • RoHS compliant
  • Industrial temperature range from -40°C to +85°C


  • Bluetooth speakers
  • Bluetooth music box
  • Bluetooth headset
  • Car audio applications
  • USB audio


Bluetooth Module FSC-BT1006A
Chipset Qualcomm QCC3007
Bluetooth Standard Bluetooth 5.0 (dual mode)
Frequency Band 2.4G ISM band (2402~2480 MHz)
Transmit Output Power +9 dBm (Max.)
Receive Sensitivity -92 dBm (Typ.)
Interfaces UART, GPIO, I2C, SPI, ADC, USB
Antenna Built-in PCB antenna (external antenna optional)
Size (mm) 13 × 26.9 × 1.8 (1mm pad pitch)
Power Supply VDD_IO 1.7~3.6V, VBAT_IN 2.8~4.3V
Operating Temperature -40℃ to +85℃
Storage Temperature -40℃ to +105℃


Firmware No. Application Profiles Support
FSC-BT1006A Audio & Data General & TWS HFP, A2DP, AVRCP, BLE, SPP, Serial Upgrade
FSC-BT1006A Other Customization

FSC-BT1006x Development Resources

Send Inquiry

Scroll to Top

Send Inquiry