Long range audio module HFP test report
Long range audio module HFP test report
Long range audio module Test Environment:
Sunny; No obstacles around; Straight road; Product is 1.5m above the ground.
Test preparation:909 Master +909 ทาส
- Prepare two BT909 modules, firmware version: VER=FSC-BT909, V3.2.6, 20181105.
- Solder the two BT909s to the daughter board and prepare two sets of FSC-TL001 development boards with Codec.
- Install two BT909s on the FSC-TL001 development board and power them separately with two computers.
- Send AT command to change the mode of two BT909 modules:
Master mode command: AT+PROFILE=19
Slave mode command: AT+PROFILE=1707
Connection steps:
1. Use the serial port tool to query the MAC address code of the slave module.
Command: AT+ADDR
2. Master module connect to the slave module via the serial port tool.
XXXXXXXXXXXX represents the twelve-bit slave MAC address.
AT command of connecting to the slave module: AT+HFPCONN=XXXXXXXXXXXX
3. After successful connection, master module send audio command to slave module via serial port tool.
Command: AT+HFPAUDIO=1
Test steps:
- Plug the headphone or speaker into the SPK2 interface of the two development boards FSC-TL001.
- Sound can be heard from headphone or speaker of the master FSC-TL001 development board when speaking at MIC of slave FSC-TL001 development board.
- Sound can be heard from headphone or speaker of the slave FSC-TL001 development board when speaking at MIC of master FSC-TL001 development board.
- Fix one of the two devices, move another, keep talking, ensure the sound quality is clear, no noise, the farthest distance without transposition
Test result:
The longest distance is 90m, if out of the range, the sound will be noise, ตัวสั่น, เป็นระยะๆ และปัญหาอื่นๆ.
หากคุณสนใจโมดูลนี้, ติดต่อเราเพื่อขอข้อมูลเพิ่มเติม. ขอบคุณ!
สินค้าที่เกี่ยวข้อง