Wi-Fi de banda dupla FSC-BW256B 6 + BT de modo duplo 5.4 Módulo
FSC-BW256B module features a high-performance SoC, leading the industry in Wi-Fi 6 2.4GHz&5GHz Dual-band and Bluetooth 5.4 dual-mode technology with the lowest power consumption. It includes a Cortex-M4F CPU operating up to 480 MHz, 992KB SRAM, 896KB ROM, and up to 32Mbits of on-chip SPI flash memory, supporting secondary development. With interfaces like SPI, SDIO, I²C, and UART, it offers versatile control and data transmission capabilities. The module supports IEEE 802.11 b/g/n/a/ac/ax, TCP/UDP/HTTP/MQTT protocols, and Bluetooth SPP/GATT profiles, making it ideal for integrating Wi-Fi and Bluetooth into various systems cost-effectively.
Características
- Wi-fi:
- CMOS single-chip fully-integrated RF, Modem e MAC
- Wi-fi 6 supports 2.4GHz/5GHz frequency band
- The highest data rate is 286.8 Mbps with 20/40MHz bandwidth
- Supports 5MHz/10MHz mode
- -97dBm RX sensitivity under 11b 1M mode
- Tx power up to +20 dBm in 11b mode and +18dBm in HT/VHT/HE MCS7 mode
- Supports STA, PA, Wi-Fi direct mode at the same time
- Supports STBC and beamforming
- Supports Wi-Fi 6 TWT
- Supports two NAVs, buffer report, space reuse, Multi-BSSID, power saving in PPDU
- Supports LDPC
- Supports MU-MIMO, OFDMA
- Supports DCM, medium code, HORA
- Supports WEP/WPA/WPA2/WPA3-SAE Personal and MFP frequency band
- Bluetooth:
- Supports all the mandatory and optional features of Bluetooth 2.1+EDR/3.0/4.x/5.3/5.4
- Bluetooth 5.4 modo duplo (BR/EDR and BLE)
- Supports advanced master and slave topologies
- Em geral:
- Integrates MCU to execute Wi-Fi and Bluetooth protocols
- Cortex-M4F CPU operating up to 480 MHz
- 992KB SRAM, 896KB ROM, and up to 32Mbits of on-chip SPI flash memory
- Supports SPI, SDIO, I²C, and UART
Especificações
| Wi-fi | |
|---|---|
| Padrão | Wi-fi 6 (IEEE 802.11 a/b/g/n/ac/ax) |
| Freqüência | 2.4 GHz / 5 GHz |
| Transmitir energia | +20 dBm (Máx.) |
| Receba Sensibilidade | -97 dBm (Min.) |
| Modos | STA, PA, Wi-Fi direto (P2P) |
| Protocolos | TCP, UDP, HTTP, MQTT, outros protocolos personalizados |
| Antena | Providing on-board Ipex connector by default Support installing external antenna on EXT_ANT pin |
| Bluetooth | |
|---|---|
| Padrão | Bluetooth 5.4 (BR/EDR & O) |
| Freqüência | 2.4 GHz |
| Perfis | PPS, GATT, outros perfis personalizados |
| Antena | Antena PCB integrada por padrão Support installing on-board Ipex connector |
| Em geral | |
|---|---|
| Dimensão (milímetros) | 13 × 26.9 × 2.2 |
| Contagem de GPIOs | 17 |
| Host Communication Interface | Padrão: UART
Personalizado: IPS, USB, SDIO |
| Temperatura operacional | -20°C ~ +80°C |
| Temperatura de armazenamento | -40°C ~ +85°C |
| Tensão de alimentação | VDD: 3V ~ 3,6 V VDD_IO: 1.8V / 3.3V |
| Firmware Upgrade | OTA |
| Certificações | SRRC |
Aplicativos
IoT sem fio
Casa inteligente
Automação Industrial