Bluetooth FSC-BT966 5.0 Modulo audio
FSC-BT966 is a Bluetooth 5.0 dual-mode audio SoC module, supporting Bluetooth BR/EDR and LE standards for comprehensive audio and data communication. Integrated with an application processor, embedded flash memory, high-performance stereo codec, and various subsystems like I²S, SPI, LED drivers, PWM, and ADC, it operates as a system-on-chip (SoC). Its dual-core architecture with flash memory allows easy product differentiation without extending development cycles. Equipped with Feasycom firmware, the module supports simple AT commands over a serial interface, making Bluetooth integration straightforward.
Scheda di sviluppo correlata
fsc-db008 
Caratteristiche
-
-
-
- Bluetooth® v5.0 wireless MCU to execute Bluetooth protocol stack. Integrated ARM Cortex-M3 microprocessor core.
-
-
- Audio classico Bluetooth:
- Canale orientato alla connessione sincrona Bluetooth(SCO: HFP)
- Canale Bluetooth senza connessione asincrona(ACL: A2DP)
- Specifica RF:
- Bluetooth v5.0 dual mode transceiver
- Profili Bluetooth BR/EDR/BLE: HFP/HSP, A2DP, AVRCP, PBAP, MAPPA, SPP, A, GATT, ecc.
- Broadcom proprietary LE data rate up to 2 Mbit/s
- BLE HID profile version 1.00 compliant
- Bluetooth Device ID profile version 1.3 compliant
- Supports Generic Access Profile (SPACCO)
- Supports Adaptive Frequency Hopping (AFH)
- Excellent receiver sensitivity
- Generale:
- 13Confezione da 36 pin per timbri da mm × 26,9 mm
- Antenna di bordo, supporta l'installazione di un'antenna Feasycom esterna o di un'altra antenna
- On-chip power-on reset (POR)
- Integrated low dropout regulators (LDO)
- PCM/I²S Interface
- I²C interface (compatible with NXP I2C slaves)
- Supporta l'aggiornamento OTA
- Supporta una personalizzazione approfondita
- Audio classico Bluetooth:
-
-
-
Specifiche
| Norma Bluetooth | Bluetooth v5.0 dual mode |
| Trasmettere potenza | +12 dBm (Maximum) |
| Ricevi sensibilità | -95.5 dBm (Typical) |
| Codec audio | SBC e CAA |
| Profili | BR/EDR: A2DP, AVRCP, HFP, PAS, PBAP, SPP BLE: GATT Client and Peripheral - Any Custom Services |
| Certifications | BQB, SRRC |
| Conteggio GPIO | 10 |
| Interfacce | UART, I2C, SPI, I²S, PCM, USB, ADC, DAC, PWM |
| Antenna | On-board antenna by default
Support installing external Feasycom antenna and other antenna |
| Dimensioni (mm) | 13 × 26.9 × 2.0 |
| Temperatura operativa | -30°C~+85°C |
| Temperatura di conservazione | -40°C ~ +105°C |
| Tensione di alimentazione | VDD: 3.0 ~ 3.6V |
Applicazioni
Dispositivo multimediale
Sistema AV per auto
Casa intelligente
Vendita al dettaglio intelligente
