FSC-BT618 CC2642R BLE 5.2 Module émetteur-récepteur
FSC-BT618 is a wireless microcontroller (MCU) BLE module targeting Bluetooth 5.2 Low Energy applications. Very low active current and low-power mode current consumption provide excellent battery lifetime and allow for operation on small coin cell batteries and in energy-harvesting applications. FSC-BT618 contains unique ultra-low power sensor controller for interfacing external sensors and for collecting analog and digital data autonomously while the rest of the system is in sleep mode. It supports advanced BLE 5.x features: High Speed with LE 2Mbit PHY, Long Range with LE coded PHY, 255 Bytes Advertising extensions, ÉCART, ATT/GATT, SMP, and L2CAP profiles. With Feasycom firmware, developers can control all Bluetooth functions by simple UART AT commands.
Caractéristiques
-
-
-
- TI CC2642R Low power BLE MCU to execute complete Bluetooth protocol stack
-
- Advanced BLE 5.x features:
- High Speed with LE 2Mbit PHY
- Long Range with LE coded PHY
- 255 Bytes Advertising extensions
- Spécification RF:
- 2.4-GHz RF Transceiver Compatible With Bluetooth 5.2 Low Energy and earlier LE Specifications
- Link Budget of 102 dB for BLE
- Excellent Receiver Sensitivity (-95 dBm for Bluetooth low energy 1 Mbit/s), Selectivity, and Blocking Performance
- Classe 1.5 soutien (jusqu'à +5 dBm)
- Général:
- 13mm x 26.9mm stamp 36-pin package
- Prise en charge BLE centrale et périphérique
- Prise en charge de la mise à niveau OTA
- Profils de pile Bluetooth: À, GATT, et autres protocoles BLE
- UART baud rate range: 1200 bps ~ 921600 bps (default: 115200 bps)
- UART, I2C, IPS, MLI, 12-bit ADC (200ks/S) interfaces
- Supports eight capacitance sensor button
- Integrated temperature sensor
- Advanced BLE 5.x features:
-
-
Caractéristiques
| Ébrécher | TI CC2642R |
| Norme Bluetooth | Bluetooth v5.2 Low Energy (BLE) |
| Puissance de transmission | +5 dBm (Max.) |
| Recevez la sensibilité | -105 dBm (Min.) |
| Profils | BLE: À, GATT, ÉCART, and other protocols |
| Nombre de GPIO | 18 |
| Interfaces | UART, I2C, IPS, CDA, DAC, MLI |
| Antenne | Antenne embarquée par défaut Prise en charge de l'installation d'une antenne Feasycom externe ou d'une autre antenne |
| Dimensions (mm) | 13 × 26.9 × 2.2 |
| Température de fonctionnement | -40°C ~ +85°C |
| Température de stockage | -40°C ~ +85°C |
| Tension d'alimentation | VDD: 1.8V ~ 3.8V |
Applications
