FSC-BW104 QCA6574A Wi-Fi 5 + BT 5.0 Module

Categories:
FSC-BW104

FSC-BW104 module, using the QCA6574A IC, is a single-die WLAN and Bluetooth combo solution supporting 2x2 MIMO with two spatial streams for IEEE 802.11 a/b/g/n/ac WLAN standards and Bluetooth 5.0. It enables seamless integration of WLAN/BT and Low Energy technology. The module features advanced collaborative coexistence hardware mechanisms and algorithms, optimizing WLAN and Bluetooth collaboration for maximum performance and enhanced quality in simultaneous voice, video, and data transmission. The FSC-BW104 is ideal for designers seeking to add wireless capability to their products, offering high design flexibility, a short development cycle, and quick time-to-market.

Features

  • Highly integrated wireless local area network (WLAN) system-on-chip (SoC) for 5GHz 802.11ac, or 2.4GHz/5GHz 802.11n WLAN applications
  • Supports BT 5.0, ANT+ and is backward-compatible with previous BT versions from v1.2
  • Maximal Likelihood (ML) decoding, Low-Density Parity Check (LDPC), Rx Space Time Block Code (STBC)
  • Supports 20/40MHz at 2.4GHz and supports 20/40/80MHz at 5GHz
  • Supports BT-WLAN coexistence and ISM-LTE coexistence
  • Support BT for class 1 and class 2 power-level transmissions without requiring an external PA (power amplifier)
  • Enhanced qualification based on selective AEC Q100 and JEDEC test cases
  • Single-stream spatial multiplexing up to 433.3 Mbps data rate. (Under dual-antenna status, 802.11ac: Up to 867 Mbps)
  • Low power SDIO 3.0 / SDIO 2.0 interface for WLAN and UART/PCM interface for BT
  • UART (Max Baud Rate 3.2 Mbps)
  • Stamp module suitable for Surface Mounted Technology (SMT)
  • Iron Shielding case
  • Stamp-53 package
  • Dimensions (Iron Shielding Case): 23.4mm (L) × 19.4mm (W) × 2.6mm(H)
  • Operating Voltage:
    • VBAT: 3.14V ~ 3.46V
    • VIO: 1.71V ~ 3.46V
  • RoHS / REACH Compliant
  • External Antenna
  • Support GATT, HID, DUN, FTP, ANCS
  • Support HFP, A2DP, AVRCP, PBAP, SPP, IAP2
  • Support Android / Linux

Applications

  • Car audio & video system
  • Measurement systems
  • STB/OTT/IPTV

Specifications

Categories Features Implementation
Bluetooth
Bluetooth Standard   Bluetooth V5.0+EDR
Frequency Band   2.402 ~ 2.480 GHz
Bluetooth Class   Class 1,Class 2
Range, line of sight   Up to 10m
Transmit Power   +9dBm (Max.)
Receive Sensitivity   -89 dBm (Min.)
Support Mode   Slave and Master
Profiles   HFP, A2DP, AVRCP, SPP, PBAP, HID, DUN, FTP, GATT, IAP2, ANCS
Maximum Throughput   3 Mbps
Interfaces   UART, PCM
Wi-Fi
Wi-Fi feature   2.4G: IEEE 802.11 b/g/n radio
5G: IEEE 802.11 a/n/ac radio
Range, line of sight   Up to 100m
Frequency Band   2.4GHz and 5GHz frequency band
Transmit Power   +17 dBm (Max.)
+10 dBm (Min.)
Receive Sensitivity   -80 dBm @ 11 Mbps
-71 dBm @ 54 Mbps
-70 dBm @ HT20 MCS7
-70 dBm @ HT40 MCS7
-60 dBm @ VHT80 MCS9
Profiles   WIFI-AP(access point), WIFI-Station
Maximum throughput   802.11b: Up to 11 Mbps
802.11g: Up to 54 Mbps
802.11n: Up to 300 Mbps
802.11ac: Up to 867 Mbps (Under dual-antenna status)
Security   WEP, TKIP, AES, WPA, WPA2
Interface   SDIO
General
Dimensions (mm)   23.4 × 19.4 × 2.6
Hardware Interfaces   UART, GPIO, SDIO, PCM/I²S
Antenna   External
(Dual-band antenna, supporting 2.4GHz and 5.8GHz frequencies)
Operating Temperature   -40°C ~ +85°C
Storage Temperature   -40°C ~ +85°C
Operating Voltage (VBAT)   3.3V (Typ.)
VIO   1.8V ~ 3.3V (Typ.)
Miscellaneous Lead Free Lead-free and RoHS compliant
Warranty One Year
Humidity   10% ~ 90% non-condensing
MSL grade:   MSL 3
ESD grade:   Human Body Model:  Pass ±2000V, all pins
Charge device model:  Pass ±250V, all pins
Scroll to Top

Send Inquiry