Introduction
Bluetooth Printer Module Solution is one of the most experienced solutions that Feasycom provides. Bluetooth Thermal Printers are widely used in various fields such as instrumentation, utility meter reading, supermarkets, mobile police systems, convenience stores, mobile government affairs systems, postal services, handheld devices, restaurants, etc. As a short-range wireless communication protocol, Bluetooth technology has Low cost, low power consumption, high speed, convenient and flexible features, very suitable for printer products.
Figure 1
Figure 1 shows the overall block diagram of a Bluetooth printer solution:
1) Bluetooth host devices (such as mobile phones, PADs, computers, etc.) to search and connect Bluetooth slave module by wireless communication to establish transparent transmission serial port communication channel.
2) The slave module data transmit to the printer motherboard MCU, printer driver to execute the printing job
Bluetooth Module Introduction
Figure 2 is the module designed by Shenzhen Feasycom Technology Co., Ltd. It is an embedded bluetooth serial communication dual mode module, connect with the bluetooth master chip via the UART serial port , it can achieve wireless data transmission between Bluetooth host device (mobile phone or computer, etc.) and the printer device.
Power on the FSC-BT826 module and enter command mode, it can modify the corresponding parameters according to the instruction manual, such as Bluetooth name, baud rate, pairing code. In the printer application, as a slave, other bluetooth devices (such as mobile phones, PAD, computers, etc.) can search for this Bluetooth module, set up a connection and data transmission, after the successful connection, Bluetooth module and the printer enter into the transparent mode.
Bluetooth module application diagram
Pin instructions
Pin No.
Pin Name
Pin Descriptions
1
UART-TX
UART data output
2
UART-RX
UART data input
3
UART-CTS
UART clear to send active low
4
UART-RTS
UART request to send active low
11
RESET
Reset if low. Input debounced so must be lo for >5ms to cause a reset.
12
VDD-3V3
Power supply voltage 3.3V
13
GND
Power Ground
32
PIO9
Programmable input/output line
Alternative Function: LED(Default)
33
PIO10
Programmable input/output line
Alternative Function: BT Status(Default)
Table 1
Shenzhen Feasycom Technology Co., Ltd. has its own protocol stack for the printer industry and launched different modules to meet customers’ demands, it can support not only Bluetooth 2.0 / 3.0 protocols or Bluetooth 4.0/4.2/5.0/5.1 BLE protocol single-mode module, but also Bluetooth 2.0 / 3.0 protocol and Bluetooth 4.04.2/5.0/5.1 BLE dual-mode module, the main products are as Table 2:
Module No. |
Details |
FSC-BT826E |
Bluetooth 4.2 Dual-Mode Module, Multiple Connections, SPP+BLE |
FSC-BT836B |
Bluetooth 5 Dual-Mode Module, Mutiple Connections, High Speed, SPP+BLE |
FSC-BT901 |
Bluetooth 4.2 Dual-Mode Module, Nano Size Module, SPP+BLE+A2DP |
FSC-BT909 |
Bluetooth 4.2 Dual-Mode Module, High Transmit Power, Long-Range Application Module. SPP+BLE+A2DP |
Table 2