Introduction to Bluetooth multi connection

Table of Contents

There are more and more cases of connecting multiple Bluetooth devices in daily life. Below is an introduction to the knowledge of multiple connections for your reference.

Common Bluetooth single connection

Bluetooth single connection, also known as point-to-point connection, is the most common Bluetooth connection scenario, such as mobile phones<->vehicle on-board Bluetooth. Like most communication protocols, Bluetooth RF communication is also divided into master/slave devices, namely Master/Slave (also known as HCI Master/HCI Slave). We can understand HCI Master devices as "RF Clock providers", and the 2.4G wireless communication between Master/Slave in the air must be based on the Clock provided by Master.

Bluetooth multi connection method

There are several ways to achieve Bluetooth multi connection, and the following is an introduction to 3.

1:Point-to-Multi Point

This scenario is relatively common (such as the printer BT826 module), where a module can simultaneously connect up to 7 mobile phones (7 ACL links). In the Point to Multi Point scenario, the Point device (BT826) needs to actively switch from HCI-Role to HCI-Master. After successful switching, the Point device provides a Baseband RF clock to other Multi Point devices to ensure the clock is unique. If the switching fails, it enters the Scatternet scenario (scenario b in the following figure)

Bluetooth multi connection

2: Scatternet (c in the above figure)

If the multi connection scenario is relatively complex, multiple nodes are needed in the middle to relay. For these relay nodes, they should also serve as HCI Master/Slave (as shown in the red node in the above figure).

In the Scatternet scenario, due to the presence of multiple HCI Masters, there may be multiple RF clock providers, resulting in unstable network connections and poor anti-interference ability

Note: In practical application scenarios, the existence of Scatternet should be avoided as much as possible

BLE MESH

BLE Mesh is currently the most widely used solution in Bluetooth networking (such as in the field of smart homes)

Mesh networking can achieve related communication between multiple nodes, which is a distributed networking method with many specific contents that can be directly inquired about.

Bluetooth multi connection

3: Multi connection recommendation

We recommend a low-power (BLE) 5.2 module that supports Class 1 Bluetooth modules. The FSC-BT671C uses the Silicon Labs EFR32BG21 chipset, including a 32-bit 80 MHz ARM Cortex-M33 microcontroller that can provide a maximum power output of 10dBm. It can be used for Bluetooth Mesh networking applications and is widely used in fields such as lighting control and smart home systems.

Related products

FSC-BT671C Features:

  • Low Power Bluetooth (BLE) 5.2
  • Integrated MCU Bluetooth protocol stack
  • Class 1 (signal power up to+10dBm)
  • Bluetooth BLE mesh networking
  • The default UART baud rate is 115.2Kbps, which can support 1200bps to 230.4Kbps
  • UART, I2C, SPI, 12 bit ADC (1Msps) data connection interface
  • Small size: 10mm * 11.9mm * 1.8mm
  • Provide customized firmware
  • Supports over the air (OTA) firmware updates
  • Working temperature: -40 ° C~105 ° C

Summary

Bluetooth multi connection has accelerated the pace of convenience in life. I believe there will be more Bluetooth multi connection applications in life. If you need to learn more, you can contact the Feasycom team!

Scroll to Top