FSC-BT660

FSC-BT660 Pequeño BLE 5.3 Sig Mesh & Módulo de materia/optimista

FSC-BT660 is ideal for mesh loT wireless connectivity using Matter or OpenThread, it delivering a potencia máxima de +19.5 dbm, Adecuado para la aplicación de largo alcance. Por defecto, FSC-BT660 module is equipped with powerful and easy-to-use Feasycom firmware. It’s easy t o use and completely encapsulated. Feasycom firmware enables users to access wireless functionality with simple UART AT commands delivered to the module over serial interface, just like a wireless modem. Por lo tanto, FSC-BT660 provides an ideal solution for developers who want to integrate Bluetooth wireless technology into their design.

Descargar

Ficha de datos
Obtener una muestra
        • Long range and Low power BLE&multiprotocol-radio MCU to execute complete protocol stack. High Performance 32-bit 78 MHz ARM Cortex®-M33 with DSP instruction and floating-point unit for efficient signal processing. Matrix Vector Processor for AI/ML acceleration
        • Características avanzadas de BLE.x:
          • Alta velocidad con le 2 mbit phy
          • Largo alcance con LE codificado Phy
          • 255 Bytes extensiones publicitarias
        • Low System Energy Consumption:
          • 4.4 mA RX current (1 Mbps GFSK)
          • 5.1 mA RX current (250 kbps O-QPSK DSSS)
          • 5 mA TX current @ 0 potencia de salida de DBM
          • 33.4 μA/MHz in Active Mode (EM0) en 39.0 megahercio
          • 1.3 μA EM2 DeepSleep current (16 kB RAM retention and RTC running from LFRCO)
        • Especificación de RF:
          • 2.4 GHz radio operation, RF Transceiver
          • Asunto
          • OpenThread
          • Zigbee
          • Bluetooth baja energía (Bolle 5.3)
          • Bluetooth Mesh
          • Propiedad 2.4 GHz
          • Multiprotocol
          • -105.4 dBm sensitivity @ 250 kbps O-QPSK DSSS
          • -105.7 dBm sensitivity @ 125 kbps GFSK
          • TX power up to 19.5 dbm
        • General:
          • 12mm x 15mm small size stamp 36-pin package
          • Antena a bordo, Admite la instalación de la antena externa de Feasycom u otra antena
          • Apoyar a Ble Central y Periférico
          • Apoya la actualización de OTA
          • Perfiles de pila Bluetooth: A, Gatte, Cementerio, y otros protocolos BLE
          • Rango de tasa de baudios de UART: 1200 bps ~ 921600 bps (por defecto: 115200 bps)
          • Uart, I2C, SPI, SmartCard (ISO 7816), IrDA, I²s, PWM, DALI, IrDA, RTC, PDM, ADC, DAC interfaces
          • Low-Frequency RC Oscillator with precision mode to replace 32 kHz sleep crystal (LFRCO)
          • Keypad scanner supporting up to 6x8 matrix (KEYSCAN)
          • Die temperature sensor with +/-1.5 °C accuracy after single-point calibration
Artículo Descripción
RF Standards Bluetooth v5.3 Low Energy
Otro: Asunto, OpenThread, Zigbee, Bluetooth Mesh, Propiedad 2.4 GHz
Transmisión de potencia +19.5 dbm (Max.)
Recibir sensibilidad -105.7 dbm (Mínimo)
Perfiles Bolle: A, Gatte, Cementerio, Bluetooth Mesh
Recuento de GPIO 20
Interfaces Uart, I2C, SPI, ADC, DAC, PWM
Antena Antena a bordo de forma predeterminada
Admite la instalación de la antena externa de Feasycom u otra antena
Dimensiones (mm) 12 × 15 × 1.7
Temperatura de funcionamiento -40° C ~ +85 ° C
Temperatura de almacenamiento -40° C ~ +105 ° C
Voltaje de suministro VDD: 1.71En ~ 3.8v

 

Automatización industrial
Navegación
sensor
Ciudades inteligentes
Inicio inteligente
Seguridad inteligente
IoT inalámbrico

    CONSULTA

    Chat ahora